Tooling List

Milling Vises (Return to Top)
01800	3" ANGLOCK Vise, Used	$375
03755	4" Milling Machine Vise, Pull Type, Used	$150
03522	5" YUASA #550-602 Accu-Lock Milling Machine Vise, Used	$250
04548	5" PALMGREN Mill Vise, Used	$75
03756	6" Milling Machine Vise, Pull Type with Speed Handle, Used	$200
05180	6" CHICK Bi-Lock Vise, Used	Call
04070	6" KURT D675 Anglock Mill Vise, 6" Wide Jaws x 6-3/4" Opening, Used	$350
04970	6" KURT D675 Anglock Mill Vise with Swivel Base, Used	$450
00496	6" KURT Anglock Mill Vise, Used	$300
04174	6" VERTEX Anglock Copy Mill Vise with Swivel Base, Used	$150
05106	6" YUASA Accu-Lock Anglock Type Vise, Used	$250
04401	6" KURT Kurt-II Manual Pull Type Milling Machine Vise, Used	$600
04574	6" KURT Versatile Lock Modular Milling Machine Vise, Used	$450
03204	6" KURT TYPE Series II Milling Machine Vise, Used	$225
03564	7" K&T(?) Mill Vise, Used	$350
00501	8" KURT D80 Anglock Vise, No handle, Bent Screw on Handle End, Used	$500
04999	8" SPI (Japanese Mfgr) Anglock Vise, No Handle, Used	$550
05014	8" YUASA Accu-Lock Anglock Type Vise, Jaw Plate is not Hardened, Used	$500
00502	9" MILL VISE, Used	$600
04513	5" 2-Way Tilt/Swivel Vise, Used	Call
05008	5" Tri-Vise SIMCO 3-Angle Milling Machine Vise, S/N-45470, Used	$1,250
04998	8" KURT Swivel Base for Anglock Vise, Used	$200
03523	4" Anglock Vise Jaw Set, Used	$25
03524	5" Anglock Vise Jaw Set, Used	$25
Milling Spindle Tooling (Return to Top)
02418	R8 SNAP CHANGE Power Drawbar, Used	$450
04567	CAT-20 Quick Change Collet Holder, Used	$90
04568	ER-11 Spring Collet, Used	$6
04572	ER-32 Spring Collet, Used	$9
04569	ER-16 Spring Collet, Used	$6
04570	TG-100 Spring Collet, Used	$9
04571	C-8 Spring Collet, Used	$9
04770	#3 Morse Taper UNIVERSAL KwikSwitch 200 Adapter, Used	$100
04771	#4 Morse Taper UNIVERSAL KwikSwitch 200 Adapter, Used	$100
03210	#200 UNIVERSAL Kwick-Switch Boring Bar Quick Change Holder, Used	$70
03212	#200 UNIVERSAL Kwick-Switch Jacobs Taper Quick Change Holder, Used	$60
04752	#200 UNIVERSAL Kwick Switch Morse Taper Quick Change Holder, Used	$60
03213	#200 UNIVERSAL Kwick-Switch Threaded for Boring Head Quick Change Holder, Used	$60
03435	#200 UNIVERSAL Kwick-Switch Quick Change Holder, with Universal 3" Boring Head, Used	$250
03202	#200 UNIVERSAL Kwick-Switch Collet Quick Change Holder, Used	$80
03546	#300 UNIVERSAL Kwik-Switch Quick Change Holder, Used	Call
04751	#400 UNIVERSAL Kwik Switch Quick Change Holder, Used	Call
02203	UNIVERSAL BT-35 Acuraflex Collet Holders, Used	$70
03966	BT-40 Quick Change Holder for Jacobs Rubber-Flex Collets, Used	$50
04071	Cat-40 Quick Change Holder, Used	Call
03461	Cat-40 ER Style Collet Quick Change Holder with Collet, Used	$80
03462	Cat-40 LYNDEX Tap Holder Quick Change Holder, Used	$150
04846	NIKKEN BT-45 Ultra-Lock Milling Chuck, 1" Maximum Collet Capacity, Used	$125
04847	NIKKEN BT-45 Quick Change Solid End Mill Holder, Used	$50
04848	NIKKEN BT-45 Quick Change Jacobs Taper Holder, Used	$50
04851	Small Collet Holder NIKKEN BT-45 Quick Change Holder, Used	$50
03573	CAT-45 End Mill Quick Change Holder, Used	$50
03574	CAT-45 Morse Taper Quick Change Holder, Used	$50
03576	CAT-45 DeVlieg Style Boring Bar Quick Change Holder, Used	$90
03575	CAT-45 Shell Mill Quick Change Holder, Used	$60
03616	CAT-45 Collet Quick Change Holder, Used	$50
03577	CAT-45 Miscellaneous Quick Change Holder, Used	$50
03566	CAT-50 Morse Taper Quick Change Holder, Used	$50
03567	CAT-50 Collet Quick Change Holder, Used	$70
03568	CAT-50 Shell Mill Quick Change Holder, Used	$60
03571	CAT-50 SHOP BUILT 24" Max Diameter DeVlieg Style Adjustable Fly Cutter Quick Change Holder, Used	$200
03582	CAT-50 4"OD x 9" Long Blanks Quick Change Holder, Used	$60
03565	CAT-50 End Mill Quick Change Holder, Used	$50
03867	CAT-50 Rigid Tap Driver Quick Change Holder, Used	$125
03708	#50 V-FLANGE DIN2080 End Mill Holder, fits Large Cincinnati 5-Axis Machines or Standard #50 NMTB, Used	$50
00518	#40NT ARBOR, Used	$75
00523	R8 COLLET - USED, Used	$6
00524	R8 COLLET - NEW	$24
00527	R8 HOLDER, Used	$20
00529	#40NT HOLDER, Used	$30
00531	#50NMTB Milling Machine Holder, Used	$40
04749	#50NT x 200KS UNIVERSAL ENG. Kwik Switch Adaptor, Used	$100
Milling Boring Heads (Return to Top)
03448	2" BRIDGEPORT #1 Boring Head, Used	$250
05201	2" CRITERION DBL-202 Boring Head with 3/4" Straight Shank, Used	$150
05202	2" CRITERION DBL-202 Boring Head with #30 NT Arbor, Used	$150
04685	2-1/2" Boring & Facing Head, Uses 1/2" Bars, Used	$250
05054	3" x #3MT Boring & Facing Head, Used	$300
03445	3" BRIDGEPORT #2 Boring Head, Used	$300
05203	3" CRITERION DBL-203 Boring Head with #30 NT Shank, Used	$200
05204	4" CHANDLER DUPLEX 11/263 Boring Facing Head, S/N-3656, with #30 NT Shank, Used	$400
Milling Indexing Holders (Return to Top)
04337	6" 3 Jaw KITAGAWA AS06 Self-Contained Power Chuck on 8" Plate for Milling Machine, Never Used	$1,500
04867	3-Jaw Chuck SMW Programmable 4th Axis, System-35 Control, Used	Call
05191	10" 3 Jaw YUASA PDX-10 Programmable Indexer and PNC-500 Control, 3-1/2" Through Hole, Used	$3,950
01891	12" NEWS Horizontal Vertical Rotary Table, Used	$850
02516	12" BRIDGEPORT Rotary Table, Used	$850
03809	14" YUASA 550-054 Horizontal-Vertical Rotary Table, Used	$1,250
04370	17-1/2" SIP Horizontal Rotary Table, Used	Call
03110	18" TROYKE Horizontal-Vertical Rotary Table, Used	$1,500
03659	26"x 26"x 9-1/2" Rotary/Index Table, Used	Call	*
04081	36" CINCINNATI A-43M-1463170 Horizontal Rotary Table, S/N-42M-463170, Used	$3,500
04735	13" ROYAL-ZEATZ PT-320 Tilting Rotary Table, Used	$1,750
01827	16" PRATT & WHITNEY Tilting Rotary Table, S/N-0346, Used	$2,500
04369	12" SIP P1-4 #750 Tilting Rotary Table, Used	$2,750
04501	8" PALMGREN Cross-Sliding Rotary Table, Used	$300
02914	12"x 12" TROYKE DMT-15 Cross-Sliding Rotary Table, 10"x 10" Travel, S/N-3935-19, Used	$2,950
05194	8" x 8 Position PDC / WEISS Index Table, Used	$100	*
04675	12" Face Plate YORK TOOL Indexing Fixture, Used	Call
02926	9"x 16" ANGLE COMPUTER CO. Universal Tilting Surface Plate, S/N-513-B, Used	$1,250
02457	5C NEWS Rapidex Indexer, Used	$75
03452	5C YUASA Spindex Indexer, Used	$150
04648	5C HARDINGE TYPE Horizontal-Vertical Indexer, Used	$500
02447	5C HARDINGE H-V Indexer, Snub Nose, Used	$500
03217	5C HARDINGE #HV-4N5C Horizontal-Vertical Indexer, with Threaded Nose, Used	$500
02950	5C NEWS/YUASA Hardinge Style Horizontal-Vertical Indexer, S/N-0-2282, Used	$400
03045	5C CHINESE H-V Hardinge Type Indexer, Used	$225
00553	5C YUASA Horizontal-Vertical HARDINGE Style Indexer, Used	$550
05231	5C YUASA #550-004 (Hardinge Style) Horizontal-Vertical Indexer, S/N-76527, Used	$550
02877	6" DUGAS H-V Super Spacer, Used	$650
04810	6" Horizontal Vertical Super Spacer, Used	$500
02459	6" Face Plate Type WALTER Indexer, Used	$650
04911	6" YUASA Accudex Super Spacer, Used	$600
03889	8" DUGAS Super Spacer with Face Plate, Used	$550
05108	8" 3 Jaw Chuck IMPORT Super-Acudex Super Spacer/Indexer, Used	Call
04460	8" TAIWAN Super Spacer, Used	$500	*
03128	8" YUASA Accudex, Used	$750
01436	8" Indexing Chuck (Universal-Kalamazoo-Etc.), Used	$650
05013	8" YUASA Super Accu-dex, Used	$1,250
04649	DUNHAM #50M Precision Spindle Headstock with 5C Lever Collet Closer, Used	$500
04782	10" ERICKSON Super Spacer Indexer, Cushman Chuck, 24 Position, Used	$850
03885	12" HARTFORD Super Spacer with 3 Jaw Adjustre Chuck, Used	$2,250
04497	5C HARDINGE Dividing Head, S/N-967, Used	$500
00560	10" KEARNEY & TRECKER Universal Dividing Head, Used	$1,250
04789	BRIDGEPORT Tailstock for Rotary Table, Used	Call
Milling Attahcments (Return to Top)
02722	1-1/2HP BRIDGEPORT Variable Speed Mill Head, #30 Taper Spindle, Used	$2,500
02852	1-1/2HP BRIDGEPORT #2J Variable Speed Milling Head, R8 Taper, Used	$2,500
04010	1-1/2 HP BRIDGEPORT #2J Variable Speed Milling Head, Used	$2,500
05010	6" Thick X 16.5" OD COMET (?) Riser Block, Used	$200
01762	R8 BRIDGEPORT Right Angle Milling Attachment, Older Gray Style, Used	$500
04678	R8 BRIDGEPORT Right Angle Milling Attachment, Late Model, Used	$750
03487	INDEX Right Angle Milling Head Attachment, Used	$500
04809	R8 HIGH QUALITY TOOL Right Angle Head for Bridgeport, Used	$350
01862	K & T TRI D Rotary Head Die-Milling Attachment for BRIDGEPORT, Used	$1,750
04677	RALMIKES(VOLSTRO) Rotary Cross Slide Milling Head, Used	$1,250
04554	4" Stroke BRIDGEPORT Shaper Head, S/N-F-14903, for Parts only, Has broken teeth on gears, Used	Call
04913	4" Stroke BRIDGEPORT Model E Shaper Head (Slotting Attachment), S/N-E-13386, Used	$2,250
05026	4" Stroke BRIDGEPORT Model E Shaper Head (Slotting Attachment), S/N-E-14614, Used	$2,250
04462	CINCINNATI Shaping Head Attachment to fit a Horizontal Mill, Used	$1,500
00568	CINCINNATI 'Cinova' Vertical Head Unit, Used	$1,500
02784	ENSHU Vertical Head Attachment, Used	$1,000
03486	ZEROMAX Power Feed Unit for INDEX Mill, Used	$350
04138	42" Table BRIDGEPORT Longitudinal Leadscrew & Nut, Used	$200
Turret Lathe Tooling (Return to Top)
00580	W&S SLIDE TOOL, Used	$300
00581	W&S ROLLER BOX TOOL, Used	$300
00587	WARNER & SWASEY Tap Holder, Used	$250
04131	Automatic Screw Machine Adjustable Drill Holder, Used	$35
04132	Automatic Screw Machine Balanced Turning Tool, Used	$75
04133	Automatic Screw Machine Knurling Tool, Used	$125
04134	Automatic Screw Machine Swing Tool, Used	$125
04130	BOYAR SCHULTZ / BROWN & SHARPE Box Tool for Automatic Screw Machine, Used	$150
04135	Automatic Screw Machine Circular Form Tool Holder, Used	$150
Lathe Workholding Tools (Return to Top)
04618	Soft Top Jaw Set for 10" NORTHFIELD 3 Jaw Chuck, Steel, Used	$65
04619	Soft Top Jaw Set for 10" NORTHFIELD 3 Jaw Chuck, Aluminum, Used	$55
05043	10" FACE PLATE with D5 Mount, Used	$150
03893	24" D1-8 Lathe Face Plate, Used	$450
03894	6" KITIGAWA 2 Jaw A-5 #BT-206 Lathe Power Chuck, Used	$1,250
04703	6" 2-Jaw STRONG NT-206 Lathe Power Chuck, S/N-02601, Used	$950
02113	10" 2 Jaw Chuck, Used	$500
01142	12" 2-Jaw Lathe Chuck, Used	$600
03190	3" 3-Jaw Chuck with Collet Shank Adaptor, Used	Call
03017	4" BUCK 3-Jaw Lathe Chuck, Used	$350
03443	4" HARDINGE 3-Jaw Chuck, Used	Call
00628	6" 3 JAW CHUCK, Used	$200
03187	6-1/2" 3-Jaw Universal/Independent Chuck, Plain Back, Used	Call
03272	6" 3-Jaw Lathe Chuck with 2 Sets of Jaws, Plain Back, Used	Call
05136	6" CHINA MFGRD. 3 Jaw Lathe Chuck, D4 Mount, Unused in Box	$250
05053	6-1/2" HOWA Power Lathe Chuck, Drawbar Type, Used	$350
05000	6" 3-Jaw A2-5 PRATT BURNARD Power Lathe Chuck, Used	$950
03186	7-1/2" 3-Jaw, Solid Jaw with Thread Mount Chuck, Used	Call
03273	8" 3-Jaw Lathe Chuck with 2-Piece Jaws, L-1 Mount, Used	Call
03276	9" 3-Jaw Lathe Chuck with Solid Jaws, Plain Back, Used	Call
04942	9" D1-6 3 Jaw Lathe Chuck, Used	Call
03275	8" CUSHMAN 3-Jaw Lathe Chuck with 2-Piece Jaws, D-5 Camlock Mount, Used	Call
05029	8" HOWA H07MA-8-A6 Power Lathe Chuck, S/N-0167, Missing Mount Plate, Used	$850
04943	8" 3 Jaw Lathe Chuck, Plain Back, Used	Call
04683	8" D-3 3 Jaw Lathe Chuck, Used	$300
04177	10" D8 3 Jaw Lathe Chuck, TR 2-Piece Jaws, Used	$350
04430	10" PRATT BURNERD 3 Jaw SetRite Lathe Chuck, D1-8 Mount, Top Reversible Jaws, Used	$850
04930	10" BISON 3 Jaw Lathe Chuck, D8 Mount, Used	$495
05011	10" D1-6 BUCK 3 Jaw Lathe Chuck (Not an Adjustrue) - Plain Back on D6 Plate - Missing Top Jaws, Used	$500
03264	10" CUSHMAN 3-Jaw Lathe Chuck, A-8 Mount, Used	Call
04298	10" A-6 KITAGAWA HJA6-10 Power Lathe Chuck, Drawbar Type, S/N-2134, Surplus, Used	$1,500
03517	10" D-6 BURNERD BP77 3 Jaw Self Contained Power Lathe Chuck, S/N-BP77/6054, 2.5" Bore, Used	$1,750
03234	10" SMW 3-Jaw Self-Contained Power Lathe Chuck, Used	Call
03850	11" 3 Jaw Power Lathe Chuck, Used	Call
00632	12" 3-Jaw Lathe Chuck, Used	Call
03245	12" A-8 Mount Lathe Chuck, Acme Serrated Master Jaws, Used	Call
03249	12" 3-Jaw Lathe Chuck, D-6 Camlock Mount, Used	Call
03252	12" 3-Jaw with Serrated Master Jaws Lathe Chuck, Plain Back, Used	Call
04832	12" CUSHMAN 3 Jaw Lathe Chuck, A-6/D-6 Mount, 2 Piece Jaws, Used	$650
05042	12" CUSHMAN 3 Jaw Lathe Chuck, A-6/D-6 Mount, Used	$650
04431	12" GISHOLT A-8 Mount Lathe Chuck, Missing Top Jaws, Used	Call
03251	12" Independent 3-Jaw Lathe Chuck, Plain Back, Used	Call
03248	12" SCA 3-Jaw HD Steel Lathe Chuck, A-6 Mount, Used	$1,500
04923	12" SCA 3 Jaw Lathe Chuck, D1-8 Mount, Used	Call
04275	12" 3 Jaw Power Wrench A8 Mount Lathe Chuck, Used	$750
01834	12" 3 Jaw POWERHOLD #300-3-PR Power Lathe Chuck, Power Cylinder & Drawtube, S/N-2472, Used	$2,500
05215	15" BUCK Adjust-True 3-Jaw Chuck, 2 Piece Jaws; Top Jaws are off of a BUCK 6 Jaw Chuck, Used	$1,750
03649	15" D-11 CUSHMAN 15/236D11 3-Jaw Chuck, Used	$850
03235	15" A-11 Mount 3-Jaw Power-Wrench Chuck, Loose, Used	$950
03842	15" PRATT BURNERD L2 Mount 3 Jaw Chuck, Used	$700
03118	15" CUSHMAN #10580-15A11D 3-Jaw Power Chuck with Acme-Serrated Jaws, Used	$2,000
03876	15" A-11 SCA #402880 3-Jaw Chuck, Steel Body, 5" Bore, Used	$1,250
03113	15" 3-Jaw A-11 S-P #M-5088 Power Lathe Chuck, S/N-15-C-268, Used	$1,500
03872	18" D-8 3-Jaw Chuck, Used	Call
03556	18" A-11 CUSHMAN 91-600-18-200A Flame Treated 3-Jaw Power Chuck with Cylinder and Drawbar, Used	$1,500
04705	21" A-15 3-Jaw Chuck, less Top Jaws, Used	$2,750	*
05190	24" WARNER & SWASEY M2324 A2-15 Mount #4A Power Wrench Turret Lathe Chuck, 9-3/8" Hole, Used	$5,000
05189	28" WARNER & SWASEY M2329C A1-20 Mount Power Wrench #5A Turret Lathe Chuck, 12-3/4" Hole, Used	$6,500
03191	4" DUNLAP Plain Back with Thread Mount Adapter 4-Jaw Chuck, Used	Call
03271	6" 4-Jaw Lathe Chuck with Thread Mount & Collet Adaptor, Used	Call
02919	6" YUASA 4-Jaw, Hardinge HC Thread Mount Lathe Chuck, Used	$300
03184	8" D-3 CUSHMAN Steel Body 4-Jaw Chuck, fits 10EE Monarch, Used	$450
03270	8" 4-Jaw Lathe Chuck, Thread Mount, Used	Call
03403	8" D-3 CUSHMAN 4-Jaw Chuck, Steel Body, Used	Call
05006	10" D6 4 Jaw Universal/Scroll Chuck, Used	$400
04834	10" CUSHMAN 4 Jaw Lathe Chuck, A-6/D-6 Mount, Used	$500
04046	12" D1-6 4 Jaw Lathe Chuck, Used	$350
03246	12" CUSHMAN 4-Jaw Steel Body Lathe Chuck, L-1 Mount, Used	Call
03247	12" 4-Jaw Lathe Chuck, L-1 Mount, Used	Call
03207	12" ROHM D-6 Camlock Mount 4-Jaw Chuck, Used	Call
03266	14" 4-Jaw Lathe Chuck, L-1 Mount, Used	Call
03441	15" 4-Jaw CUSHMAN #10-001-15L01C Lathe Chuck, L-1 Mount, Used	Call
03244	15" UNION 4- Jaw Steel Body Lathe Chuck, L-1 Mount, Used	Call
03258	15" 4- Jaw Lathe Chuck, D-6 Mount, Used	Call
03254	15" BUCK 4-Jaw Lathe Chuck, Plain Back, 2-Pc. Jaws, Used	$600
03637	15" CUSHMAN 10-003-15-L020 4 Jaw Lathe Chuck, L-2 Mount, Used	$1,750
03638	15" CUSHMAN 10-004-15-0008 4 Jaw Lathe Chuck with L-2 Mount Adapter and 2 Piece TR Jaws, Used	$1,250
03639	15" CUSHMAN 15-2146CA11 4 Jaw Steel Body Lathe Chuck with A-11/D-11 Mount, Used	$950
04432	15" CUSHMAN 4 Jaw Lathe Chuck, L-2 Mount, Used	Call
03875	16" 4 Jaw Lathe Chuck, D1-6 Camlock Mount, Semi-Steel, Used	Call
03563	16" BISON 4 Jaw Lathe Chuck, Used	$600
04489	16" BISON 4 Jaw Lathe Chuck, D-6 Mount, New Surplus	$1,170
04442	16" 4-Jaw Plain Back Chuck, Universal Independent, Top-Reversible Jaws, Face Plate Type, Used	$750
03243	18" 4-Jaw Lathe Chuck, Plain Back w/ OD Thread, Used	Call
03873	18" 4 Jaw Lathe Chuck, D-11 Mount, Face Plate Type, Used	Call
04608	18" WARNER & SWASEY 4-Jaw Lathe Chuck, A-11 Mount, M1612, 2 Pc. Top-Reversible Tongue-Groove Jaws, Used	$2,000
05127	20" 4 Jaw D 8 Lathe Chuck, Used	$1,250
05128	20" 4 Jaw D 8 Lathe Chuck, Slotted Face, Used	$1,250
03121	21" D-11 MFGR UNKNOWN 4-Jaw Chuck, Steel Body, Used	$2,500
04924	24" TAIWAN MFGRD 4-Jaw Lathe Chuck, A-20 Mount, 12-1/2" Hole, S/N-J030, Used	$1,500
04925	24" TAIWAN MFGRD 4-Jaw Lathe Chuck, A-20 Mount, 12-1/2" Hole, S/N-J030, Used	$1,250
03641	24" SKINNER-HORTON CUSHMAN 4 Jaw Steel Body Lathe Chuck with Plain Back, No Jaws, Used	Call
03972	8" 6-Jaw L-0 Lathe Chuck, Used	$450
03442	8" BUCK 6-Jaw Adjustrue Chuck, Used	Call
04602	8" D1-3 BUCK 4761 Lathe Chuck, 6-Jaw Adjustrue, 1 Set of Jaws, Used	$450
03890	12" 6 Jaw Adjustrue Lathe Chuck, Master Jaws without Top Jaws, Used	$950
04868	15" 3 Jaw BUCK Adjust-True Chuck (6 Jaw with 3 Master Jaws), Used	Call
03879	15" D1-11 3 Jaw Lathe Chuck, Used	Call
03877	15" D1-6 PRATT BURNERD 6 Jaw SetRite Lathe Chuck with 2-Pc. Top Reversible Jaws, Used	$1,500
03878	15" D1-6 ERICKSON FORKHARDT 3 Jaw Power Lathe Chuck, Less Top Jaws, Used	Call
04963	4" 3 Jaw Chuck Live Center, Used	Call
03232	10" 4-Jaw Chuck Live Center, Used	Call
00660	5C Collet, Used, Used	$6
04836	5C Collet Stop, Used	$10
04646	6H Collet, Used, Used	$10
04001	16C Collet, Used	$25
03735	5C HARDINGE Collet Pot Chuck, Used	$20
04687	2J Collet, Used	$20
00663	NEW 5C ROUND COLLET	$19
02717	1-1/8" HARDINGE #S-10 Collet, Used	$35
02718	HARDINGE #S-10 Master Collet, Used	$45
02719	HARDINGE #S-10 or #S-16 Collet Pad Set, 1-5/8" Rd., Used	$20
03968	RIKKEN Lathe Collet, New Surplus, 1-15/16" and 3/8", Used	$30
04738	DA Double Angle Collet, Used	$15
05198	Lot: Straight Shank Collet Holders, Qty of 20+ Holders and 30+ Collets, Used	$200	*
00675	W&S MASTER COLLET, Used	$150
00676	W&S COLLET NOSE, Used	$150
00678	W&S Collet Pad Set, Used	Call
04894	S-26 Collet Pad Set, Used	$30
03231	10" 3-Jaw Chuck Dead Center, Used	Call
Lathe Tool Posts & Holders (Return to Top)
04387	3/8" C/L HARDINGE HNC/AHC/HC Turret Tools, Used	$25
04386	HARDINGE HNC Turret Tooling Plate, Used	$500
00704	40-Position Swiss mfgr'd. ENCO Quick Change Toolpost Holders, for 17" to 30" Swing Lathes, Used	$50
04903	ENCO 40-Position Swiss mfgr'd. Quick Change Toolpost, Used	$400
04904	ENCO 40-Position Swiss mfgr'd. Quick Change Holder, Used	$50
00705	KDK TOOL POST, Used	Call
00707	KDK HOLDER, Used	Call
04837	HARDINGE Quick Change Tool Holder for HLVH, Used	Call
04276	#5 WARNER & SWASEY Square Turret Toolpost, Used	Call
00716	ALORIS HOLDER, Used	Call
04902	ENCO Pull Type Quick Change Toolpost & Holders, Used	$350
03198	#CA-H ALORIS Single Dovetail Shank Type QC Holder	$220
05130	ALORIS DA Holder, Used	Call
05129	#DA DTM (Dovetail Tool Mfgr) Wedge Type Quick Change Tool Post (USA NFgrd), Used	$550
00718	ALORIS TOOL POST, Used	Call
03181	MAZAK Fast Threading Tool Holder Unit	Call
Lathe Steady & Follow Rests (Return to Top)
02760	AMERICAN CNC Lathe Steady Rest, Used	$750
05225	6" Opening CLAUSING COLCHESTER 13" Steady Rest with Plain Round Fingers, Used	$950
03285	3-1/2" Opening 14" Swing Lathe Steady Rest with Plain Flat Fingers, Used	Call
03284	4" Opening 15" Swing Lathe Steady Rest, Missing All 3 Fingers, Used	Call
03585	4-1/2"" Opening 16" Swing Lathe Steady Rest with Flat Fingers, Used	$250
03289	5" Opening 17" Swing Lathe Heavy Duty Steady Rest with Plain Flat Fingers, Used	$250
04920	6" Opening MORI SEIKI 17" Steady Rest with Plain Round Fingers, Used	$750
03282	4" Opening 18" Swing Lathe Steady Rest with Plain Flat Fingers, Used	Call
03280	5" Opening 18" Swing Lathe Steady Rest with Plain Round Fingers, Used	Call
03583	5" Opening 18" Swing Lathe Steady Rest, Bearing Fingers, 1 Finger Missing, Used	$350
04652	6" Opening 18" Swing Lathe Steady Rest with Roller Bearing Fingers, 1 Finger is Missing, Used	$400
03283	5" Opening 19" Swing Lathe Steady Rest with Plain Round Fingers, Used	Call
03587	5" Opening 19" Swing Lathe Steady Rest, Used	$250
03848	5" Opening 19" Swing Lathe Steady Rest with Roller Bearing Fingers, Used	$500
04686	5" Opening 19" Swing Lathe Steady Rest, Plain Round Fingers, Wide Base, Used	$350
05002	10" Opening 19" LEBLOND Steady Rest with Roller Fingers, Used	$1,250
03891	6" Opening 23" Swing Lathe Steady Rest with Roller Bearing Fingers, 1 Finger is Missing, Used	$350
04176	9-1/2" Opening SHOP BUILT 24" Swing Lathe Steady Rest with Roller Bearing Fingers, Used	$950
03278	8" Opening 25" Swing Lathe Steady Rest with Plain Round Fingers, Used	Call
03277	8" Opening 26" Swing Lathe Steady Rest with Roller Fingers, 1 Missing, Used	$500
Lathe Collet Closers, Barfeeds (Return to Top)
03177	5C Lever Type BIG SUNG Lever Collet Closer, Unused	Call
01327	SJOGREN Handwheel Collet Closer, Used	$350
03179	BERNERD L-0 Mount Collet Closer, Front Lever Type, Unused	Call
04416	BERNERD L-0 Mount Collet Closer, Front Lever Type, Used	$500
05009	1" to 2-1/2" PRATT BURNERD LC25/D1-6 MultiSize Collet Closer, Front Lever Type, Used	$1,250
03372	HARDINGE-SJOGREN 2J Collet D6 Camlock Mount Handwheel Collet Closer, w/ Collets, Used	$500
00740	JACOBS Rubber Flex Collet Chuck, Used	$750
03822	1-3/8" Capacity JACOBS RubberFlex Collet Chuck Collet Closer, D1-6 Mount, Used	$750
04045	1-3/8" Capacity JACOBS RubberFlex Collet Chuck Collet Closer, D3 Camlock Mount, Used	$750
03868	JACOBS J900 Series Rubber-Flex Individual Collet, Used, Used	$100
02198	JACOBS Rubber Flex Collet Set, fits JACOBS Lathe Rubber Flex Collet Chucks, Used	$1,000
03897	5C Collet Adaptor, A-5 Mount, Used	$500
05179	MORI SEIKI SL-1 Bar Feed Attachment, Used	$950
04481	MAZAK Spindle Part Support Bushings for 2" Spindle Bore Machines, Used	Call
CNC Lathe Tool Holders (Return to Top)
04290	MORI SEIKI T00091A06 CNC Lathe Tool Holder, Used	Call
04293	MORI SEIKI T13075 CNC Lathe Tool Holder, Used	Call
04294	MORI SEIKI T00075B07 CNC Lathe Tool Holder, Used	Call
04295	MORI SEIKI T02003B CNC Lathe Turning Tool Holder	$100
04388	MORI SEIKI TL3 CNC Lathe Boring Bar Tool Holder, Used	$100
Lathe Taper Attachments, Turrets, Slides (Return to Top)
04502	17" Lathe MORI SEIKI MS Taper Attachment, Used	$1,250
04503	21" Lathe MORI SEIKI MH Taper Attachment, Used	$1,250
03806	12" ATLAS/CRAFTSMAN Bed Turret, Used	$450
03093	HARDINGE DV/DSM-59 Style Tailstock, Used	$950
03094	HARDINGE Split-Bed Style Tailstock, Used	$950
00765	HARDINGE #7 Vertical Cut-Off Slide for DV59, DSM59, HSL Lathes, Used	$550
05055	HARDINGE #HC Vertical Cut-Off Attachment, Used	$550
00768	HARDINGE Split-Bed Style Swivel Compound, Used	$1,250
02456	HARDINGE DSM59 Double Swivel Compound, Used	$1,500
05005	ELGIN Split-Bed Mount Double Swivel Compound, Used	$750
03684	BRADMATIC Hardinge DV59 2-Axis Automatic Slide, Used	$1,750
Grinder Chucks, Dressers, Etc (Return to Top)
04716	7-1/2" ROTO TECHNOLOGY #307.V Rotating Spin Table, S/N-6316, with Rectangular Magnetic Chuck, Used	$950
00773	5"x 10" WALKER Ceramax Magnetic Chuck, Used	$300
00776	6" x 18" Permanent Magnet Chuck, Used	$300
03549	6"x 18" Permanent Magnet Chuck, Used	$450
02270	8" x 18" SUBURBAN Permanent Magnet Chuck, Used	$950
04215	4" Wide MITUTOYO Precision Vise, Used	$250
05232	KO LEE Univise, Used	$475
04525	CLEARVIEW Radius and Angle Wheel Dresser, Used	Call
04907	J&G TOOL CO. Angle Dresser, Used	$200
04906	SPI Radius & Angle Dresser, Used	$350
04896	HARIG Grind All No. 1 Fixture, Used	$750
04680	RALMIKE'S 'World Famous' Grind-All Fixture, 3" Center Ht., Used	$750
04681	RALMIKE'S No. 2 'Wprld Famous' Grind-All Fixture, 4" Center Ht., Used	$1,250
Grinder Workheads (Return to Top)
04967	BOYAR SCHULTZ SGA High Speed Grinding Attachment, Used	$750
03346	K.O. LEE #B943 Motorized Workhead, S/N-13940, 440V 3Ph, Used	$1,950
05228	5C KO LEE B943 Motorized Workhead, S/N-12419-PM, with 5C Drawbar, Center Driver, Used	$1,950
03626	K.O. LEE #B6043 Motorized Workhead, with 5C Collet Setup, 230V 3Ph, Used	$1,650
04551	K.O. LEE #B6043E Motorized Workhead, with 5C Collet Setup, 230V 3Ph, Used	$2,259
05230	KO LEE B947 Tap Grinding Fixture with 4 Flute Cam, Used	$500
03397	KO LEE Sensitive Workhead with 5C Air Collet Closer, Used	$1,500
05229	KO LEE BA942 Sensitive Workhead with 5C Drawbar, Index Plate, Stop Finger, Used	$950
02490	#2 CINCINATTI Sensitive Workhead, Used	$750
03131	CINCINATTI Sensitive Workhead for #2 Tool & Cutter Grinder, Used	$1,250
03396	#2 CINCINNATI Motorized Workhead, Used	$950
02738	CINCINNATI #L 1-HP Motorized Workhead (Dead Center) and Tailstock for 10" O.D. Grinder, Used	$750
03603	6" SCA 3 Jaw Chuck with #5MT Shank for Cincinnati #2 T&C Grinder Workhead, Used	$450
03604	5" 4 Jaw Chuck with #5MT Shank for Cincinnati Workhead, Used	$300
03601	ROYAL OAK Tailstock Support Bars(2) for a Form Relief Grinding Attachment, Used	$200
03436	ROYAL OAK Form Relief Grinding Attachment, S/N-294756, No cams or collets, Used	$1,500
01435	HAMMOND #VC-H Carbide Insert Grinding Attachment, S/N-9676, Used	$750
05227	5C KO LEE B982-5C Air Flow End Mill Sharpening Attachment, Used	$1,250
01943	WELDON Air-Flow End Mill Sharpening Attachment, Used	$950
04552	WELDON Plain Bearing End Mill Sharpening Attachment, Used	$500
04642	WELDON 1-1/4" Capacity End Mill Sharpening Sleeve & Air Bushing, Used	$150
04644	WELDON 5/8" Capacity End Mill Sharpening Sleeve & Plain Bushing, Used	$100
02917	STUDLER Plain Bearing Tool Sharpening Fixture, S/N-133, 5C Nose less Drawtube, Used	$350
03824	WINSLOW HC Exactamatic Wheel Flange Adaptor, Used	$150
05193	Lot: WALTHERS and ITM Wheel Flange Adaptor for CNC Tool Grinders for 3" Hole Wheels - Qty of 5, Used	$100	*
02595	#2 Tool Grinder CINCINNATI Centers, Used	$450
04981	KO LEE BC22R/BC22L Tailstock Centers, Used	$350
04435	MAKINO Tailstock Centers, Used	$550
03221	Large BLACK Adjustable Tailstock, Used	Call
04607	13" Swing Tailstock for Mill Index Head, Used	$350
02920	8"-10" YUASA Adjustable Tailstock, Used	$250
04348	YUASA TSB-810 Tailstock, Used	$250
03429	UNKNOWN MFGR. Steady Rest for a 9" Swing Universal Grinder, Used	$250
03734	FALCON #GG Flex-Shaft Grinder 14,000 RPM, S/N-2599 with Foot Control, 115Volt, Used	$175
04638	1/2 HP ROCKWELL PRECISE Super 45 Motorized Spindle, S/N-40462, with Case and 2 Plane Mount Fixture, Used	$500
04639	1-1/2 HP ROCKWELL PRECISE Super 80 Motorized Spindle, S/N-10559, 25000 RPM, Used	$1,250
Drill Chucks (Return to Top)
05200	Lot: BURR-BIT Spring Loaded Drill Burr Tool, Various Sizes, Qty of 20+, Used	$25	*
00799	DRILL CHUCK WITH SHANK, Used	Call
00800	DRILL CHUCK W/O SHANK, Used	Call
Drill & Bench Vises (Return to Top)
04313	3" Toolmakers Vise, Used	$65
05233	3" HEINRICH Cam-Lock Drill Press Vise, Used	$75
05234	3" PALMGREN Cam-Lock Drill Press Vise, Used	$75
04312	2-1/2" Tilt Drill Press Vise, Used	$35
05235	3-1/2" Angle Swivel Drill Press Vise, Used	$50
05236	3-1/2" Angle Drill Press Vise, Used	$40
04316	3" PALMGREN Drill Press Vise, Used	$25
Tapping Heads (Return to Top)
00821	TAPMATIC TAP HEAD, Used	Call
04335	TAPMATIC NCR-1A Tapping Head, Used	$500
04075	2-1/4" to 2-3/4" GEOMETRIC S-2 Collapsible Tapping Head, Taps Max Depth 1-3/8", 11TPI Coarsest Pitch, Used	$500
04076	3/4" to 2-5/8' J&L (JONES & LAMSON) #MC Collapsible Tapping Head Set with #1, 2 & 4 Heads, Used	$950
03044	WARNER & SWASEY BAKEWELL #12 Leadscrew Leaders, Used	$250
Die Heads (Return to Top)
02109	HARDINGE HC Automatic Threading Unit, Used	$1,500
03492	HARDINGE HC Manual Threading Unit, Used	$1,000
02325	1" CLEVELAND H&G Die Head, Used	$450
05197	CLEVELAND H&G #101 Style DSM Die Head with 40+ Sets of Chasers, Used	$400	*
05051	H&G #101 Die Head, Used	$350
05196	5/16"-DSA GEOMETRIC Die Head with 40+ Sets of Chasers, Used	$600	*
03835	9/16"-D GEOMETRIC Die Head, Used	$500
00831	3/4" GEOMETRIC DIE HEAD, 3/4-D, Used	$750
04434	3/4" EFEIN (Geometric Copy) Die Head, Used	$550
00832	1" GEOMETRIC DIE HEAD, 1-D, Used	$850
05052	H&G 103-DMS Die Head, Used	$400
01558	1-1/2" GEOMETRIC Die Head, Used	$1,000
03834	1-1/2" GEOMETRIC Die Head, Used	$1,000
01387	3" GEOMETRIC Die Head, Used	$1,250
05195	Lot: SALVO/REED RICO Astra Punch Thread Roller Dies, OBH-2 & OB4-2, Qty of 12, Used	$200	*
Spindles and Spindle Attachments (Return to Top)
05023	1/4" x 2 Spindle FOREST CITY TOOL CO. Eccentric Drill Head Attachment, S/N-187-114, Used	$350
05022	3 Spindle COMMANDER Select-A-Spindle Turret Drill Head, S/N-63S63A, Used	$350
03871	QUADRILL Turret Drill Head Attachment for Drill Press, Used	$350
Gages (Return to Top)
03845	.7 to 1" BROWN & SHARPE Electronic Bore Gage, Used	$500
03846	1.2 to 1.6" BROWN & SHARPE Electronic Bore Gage, Used	$500
03932	10" to 15" MITUTOYO 511-183 Bore Gage, Used	$350
05099	7/8" to 1-1/2" SCHERR 0.0001" Dial Bore Gage, Used	$250
03782	81 Pc. PHASE II Grade B Precision Gage Block Set, Used	$225
02872	35 Pc. SHEFFIELD-FONDA Grade I Precision Gage Block Set, Used	$300
05199	.501 to .625" SCHUTTE 144 Pc. (2 Missing) Precision Gage Pin Set, Used	$50
04419	5" to 20" MITUTOYO #BE4-8R-2 8 pc. Long Block Set of Class 2 Precision Gage Blocks, S/N-228541, Used	$1,750
04420	48" x 8" x 3" Straight Edge, Used	$500
Calipers & Height Gages (Return to Top)
05015	Magnetic Base with Indicator, Used	$35
05101	0-6" STARRET Depth Micrometer Set, Used	$100
05100	0-12" STARRET Depth Micrometer Set, Used	$150
03943	24" FOWLER Digital Calipers, Used	$200
04214	40" KANON (JAPANESE) Vernier Calipers, Used	$250
03754	24" STARRETT #123 Vernier Calipers in wooden box, Used	$400
05098	5" to 6" STARRET Outside Micrometers, Used	$100
05097	12" to 13" STARRET Outside Micrometers, Used	$125
04158	18" MITUTOYO 192-112 Dial Height Gage, Used	$750
Plates & Tables (Return to Top)
03470	3.5"x 3.5"x 5" 1.5" Capacity Precison V-Block, Matched Pair, Used	$350
03469	8"X 10"X 18" Slotted Universal Right Angle Iron, Used	$350
04549	12" x 10" x 6" Angle Plate, T-Slotted, Used	$250
04068	8"x 9"x 16" CHALLENGE Right Angle Iron, Used	$160
04498	6"x 6" Sine Plate, Used	$350
04527	SUBURBAN Sine Plate, Used	Call
04566	6"x 6" SUBURBAN Compound Sine Plate, Used	$500
04982	7"x 10" KO LEE BC-922L/R Bench Center, Used	$550
05105	8"x 18" KO LEE BC-3 Bench Center, S/N-1420, Used	$750
04712	18"x 24" GRANITE Surface Plate, Used	$150
04711	24"x 36" GRANITE Surface Plate, Used	$350
Bridgeport Repair Parts (Return to Top)
04684	BIJUR Bridgeport 1-Shot Lubrication Unit, Used	$100
Various Brands Repair Parts (Return to Top)
03182	13" COLCHESTER Head Conversion Kit (Pulley, Clutch, Input Shaft), Unused	Call
Motors & Pumps (Return to Top)
03558	10HP RELIANCE Machine Tool DC Super RPM Motor, Used	Call
Misc Furniture, Equipment (Return to Top)
02956	100 Lb. APACHE Platform Over/Under Scales, Used	$350
02957	100 Lb. GENERAL Platform Over/Under Scales, Used	$350
04088	22"x 28"x 35" LISTA Tool Storage Cabinet, on Casters, Used	$450
04173	22"x 28"x 35" LISTA Tool Storage Cabinet with Wood Block Top, Used	$500
05113	MOORE Wooden Tool Storage Desk, Used	Call
Tools & Carts & Boxes (Return to Top)
03511	1/2 Ton NORTON Japanese Mfgrd. Chain Hoist, Used	$95